[Previous Months][Date Index][Thread Index][Join - Register][Login]
[Message Prev][Message Next][Thread Prev][Thread Next]

Re: RE:[IP] Disconnecting

--- Which I use and like.  I do remove the set -- and then move to a new
site, after the hot tub (I'm using Humalog and decided that the temperature
concerns were larger than the usual time interval concerns).  I change sites
(not sets) daily anyway, and hot tubbing is usually a night time thing, so I
just move the site change up a few hours.
-----Original Message-----
From: Michael <email @ redacted>
To: email @ redacted <email @ redacted>
Date: May 11, 1998 08:36 PM
Subject: RE:[IP] Disconnecting

>> Wendy,
>> Disconnecting is done with the Tender infusion sets.  These are the ones
>> with the teflon cannula rather than the stainless steel needle.  When
>> you disconnect these from the pump (a little clip device), you can
>> simply reconnect by re-clipping.  You don't need to re-prime anything.
>> The other sets are not possible to disconnect.  I have never used these
>> sets, but they is not a "break" between the pump/Luer lock and the
>> delivery point.  Do any people re-use these, by removing and then
>> re-sticking themselves?
>MiniMed has a bent needle with a QR
>Insulin-Pumpers website http://www.bizsystems.com/Diabetes/
>For subscribe / unsubscribe information,
>send the next two lines in a message
>to the e-mail address: email @ redacted

Insulin-Pumpers website http://www.bizsystems.com/Diabetes/
For subscribe / unsubscribe information,
send the next two lines in a message
to the e-mail address: email @ redacted